LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Brake Control System (DTC/Circuit Diagnosis) (With ICC) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> DTC C1155: Brake Fluid Level Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK BRAKE FLUID LEVEL SWITCH

    1. Turn the ignition switch OFF.
    2. Disconnect brake fluid level switch harness connector.
    3. Check the continuity between terminals of brake fluid level switch.
      Brake fluid level switch Condition Continuity
      Terminal
      1 - 2 When brake fluid level in reservoir tank is within the specified level. No
      When brake fluid level in reservoir tank is less than the specified level. Yes

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace the reservoir tank. Refer to EXPLODED VIEW .