LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Exterior Lighting System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Headlamp Aiming System (Manual) >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK HEADLAMP AIMING SWITCH

    1. Disconnect headlamp aiming switch.
    2. Check resistance between terminal 1 and terminal 2.
      Headlamp aiming switch Condition Resistance
      (Approx.)
      Terminal Switch position
      1 2 0 160 Ω
      1 402 Ω
      2 620 Ω
      3 1100 Ω

    Is the inspection result normal?

    YES 

    Headlamp aiming switch is normal.

    NO 

    Replace the headlamp aiming switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals