LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Driver Assistance System (Introduction, Wiring Diagrams And Basic Inspection) (DCA) (Except Hybrid)) >> Basic Inspection >> Additional Service When Replacing ICC Sensor >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. ICC SENSOR AIMING ADJUSTMENT

    Adjust the ICC sensor aiming.

    GO TO STEP 2. 

  2. DCA SYSTEM ACTION TEST

    1. Perform the DCA system action test. Refer to DESCRIPTION .
    2. Check that the DCA system operates normally.

    INSPECTION END

scientia non olet · About LEMON Manuals