LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Automatic Transmission (Re0F10J) (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid)) >> Ecu Diagnosis Information >> TCM >> Reference Value >> Input/Output Signal Standard

Input/Output Signal Standard

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Terminal No.
(Wire color)		 Description Condition Value (Approx.)
+ ? Signal Input/Output
2*
(SB)		 - - - - -
4
(Y)		 Ground D position switch Input Ignition switch ON Selector lever: "D" position 10 - 16 V
Other than the above 0 V
5
(L)		 Ground N position switch Input Selector lever: "N" position 10 - 16 V
Other than the above 0 V
6
(BR)		 Ground R position switch Input Selector lever: "R" position 10 - 16 V
Other than the above 0 V
7
(V)		 Ground P position switch Input Selector lever: "P" position 10 - 16 V
Other than the above 0 V
11
(Y)		 Ground Sensor ground - Always 0 V
12
(LG)		 Ground CVT fluid temperature sensor Output Ignition switch ON CVT fluid: Approx. 20°C (68°F) 2.01 - 2.05 V
CVT fluid: Approx. 50°C (122°F) 1.45 - 1.50 V
CVT fluid: Approx. 80°C 176°F) 0.90 - 0.94 V
16
(Y)		 Ground Secondary pressure sensor Input
  • Selector lever: "N" position
  • At idle
 1.67 - 1.69 V
17
(LG)		 Ground Primary pressure sensor Input
  • Selector lever: "N" position
  • At idle
 0.90 - 0.92 V
23
(P)		 - CAN-L Input/Output - -
24
(LG)		 Ground Input speed sensor Input
  • Selector lever: "M1" position
  • Vehicle speed: 20 km/h (12 MPH)
 800 Hz
GNSJSDIA3770GB-770Courtesy of NISSAN NORTH AMERICA, INC.
26
(LG)		 Ground Sensor power supply Output Ignition switch: ON 5.0 V
Ignition switch: OFF 0 V
27*
(G)		 - - - - -
30
(SB)		 Ground Line pressure solenoid valve Output
  • After engine warming up
  • Selector lever: "N" position
  • At idle
GNSJSDIA1897GB-897Courtesy of NISSAN NORTH AMERICA, INC.
  • After engine warming up
  • Selector lever: "N" position
  • Depress the accelerator pedal fully
GNSJSDIA1898GB-898Courtesy of NISSAN NORTH AMERICA, INC.
33
(L)		 - CAN-H Input/Output - -
34
(BR)		 Ground Output speed sensor Input
  • Selector lever: "M1" position
  • Vehicle speed: 20 km/h (12 MPH)
 200 Hz
GNSJSDIA1897GB-897Courtesy of NISSAN NORTH AMERICA, INC.
35
(LG)		 Ground Primary speed sensor Input
  • Selector lever: "M1" position
  • Vehicle speed: 20 km/h (12 MPH)
 600 Hz
GNSJSDIA3770GB-770Courtesy of NISSAN NORTH AMERICA, INC.
37
(BR)		 Ground Select solenoid valve Output
  • Engine started
  • Vehicle is stopped
  • Selector lever: "N" position
GNSJSDIA1897GB-897Courtesy of NISSAN NORTH AMERICA, INC.
38
(Y)		 Ground Torque converter clutch solenoid valve Output
  • Selector lever: "D" position
  • Accelerator pedal position: 1/8 or less
  • Vehicle speed: 20 km/h (12 MPH) or more
GNSJSDIA1900GB-900Courtesy of NISSAN NORTH AMERICA, INC.
  • Engine started
  • Vehicle is stopped
GNSJSDIA1903GB-903Courtesy of NISSAN NORTH AMERICA, INC.
39
(L)		 Ground Secondary pressure solenoid valve Output
  • Selector lever: "M1" position
  • Vehicle speed: 20 km/h (12 MPH)
GNSJSDIA1897GB-897Courtesy of NISSAN NORTH AMERICA, INC.
40
(V)		 Ground Primary pressure solenoid valve Output
  • Selector lever: "M1" position
  • Vehicle speed: 20 km/h (12 MPH)
GNSJSDIA1897GB-897Courtesy of NISSAN NORTH AMERICA, INC.
41
(B)		 Ground Ground Output Always 0 V
42
(B)		 Ground Ground Output Always 0 V
45
(LG)		 Ground Power (backup) Input Always 10 - 16 V
46
(LG)		 Ground Power (backup) Input Always 10 - 16 V
47
(Y)		 Ground Power supply Input Ignition switch: ON 10 - 16 V
Ignition switch: OFF 0 V
48
(Y)		 Ground Power supply Input Ignition switch: ON 10 - 16 V
Ignition switch: OFF 0 V

*: This harness does not use.

scientia non olet · About LEMON Manuals