LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Automatic Transmission (Re0F10J) (Introduction, Wiring Diagrams And Basic Inspection) (Except Hybrid)) >> Basic Inspection >> CVT Position >> Inspection And Adjustment >> Adjustment

Inspection And Adjustment: Adjustment

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the selector lever to the "P" position.
    CAUTION:

    Rotate the wheels at least a quarter turn and be certain the Park position mechanism is fully engaged.

  2. Loosen control cable nut (A) and set manual lever (B) to the "P" position.
    G08199983Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not apply force to the manual lever.

  3. Tighten control cable nut to the specified torque. Refer to EXPLODED VIEW .
    CAUTION:

    Hold the manual lever securely in the "P" position when tightening control cable nut.

scientia non olet · About LEMON Manuals