LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Intelligent Cruise Control System (DTC/Circuit Diagnosis) (ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1F05: Accelerator Pedal Actuator Power Supply Circuit >> ADAS Control Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start the engine.
    2. Turn the DCA system ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C1F05" is detected as the current malfunction on the self-diagnosis results of "ICC/ADAS".

    Is "C1F05" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .