LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Intelligent Cruise Control System (DTC/Circuit Diagnosis) (ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1F01: Accelerator Pedal Actuator >> ADAS Control Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn the ignition switch OFF.
    2. Turn the ignition switch ON.
    3. Slowly depress the accelerator pedal completely, and then release it.
    4. Repeat step 3 several times.
    5. Perform "All DTC Reading" with CONSULT.
    6. Check if the DTC "C1F01" is detected as the current malfunction on the self-diagnosis results of "ICC/ADAS".

    Is "C1F01" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals