DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine.
- Turn the DCA system ON.
- Drive the vehicle at 10 km/h (6 MPH) or faster for approximately 15 minutes or more.CAUTION:
Always drive safely.
- Stop the vehicle.
- Perform "All DTC Reading" with CONSULT.
- Check if "C1A15" is detected as the current malfunction in the "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A15" detected as the current malfunction?
YES
Refer to DIAGNOSIS PROCEDURE .
NO
Refer to INTERMITTENT INCIDENT .