LDW/LDP System Settings Cannot Be Turned On/Off In Vehicle Information Display: Description

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

LDW system setting is not selectable in the vehicle information display.
LDP system setting is not selectable in the vehicle information display.
NOTE:
When the ignition switch is in ACC position, LDW or LDP system settings cannot be changed.
- "Lane Departure Warning" or "Lane Departure Prevention" is not indicated in the vehicle information display.
- The switching between ON and OFF cannot be performed by operating the vehicle information display.
- The item of "Lane Departure Warning" or "Lane Departure Prevention" in the vehicle information display is not active.
After turning ON the ignition switch or starting the engine, LDW or LDP settings of the vehicle information display cannot be selected for several tens of seconds under the following conditions:
- After replacing AV control unit.
- After erasing connection history of the vehicle information display.
- After erasing self-diagnosis results of the meter unit.
The LDW or LDP system setting differs from the one set at the previous driving.
NOTE:
Turn OFF the ignition switch and wait for 5 seconds or more.