LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Warning Systems Switch Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK WARNING SYSTEMS SWITCH INPUT SIGNAL

    1. Turn the ignition switch ON.
    2. Select the DATA MONITOR item "WARN SYS SW" of "ICC/ADAS" with CONSULT.
    3. With operating the warning systems switch, check the monitor status.
    Monitor item Condition Monitor status
    WARN SYS SW Warning systems switch is pressed On
    Warning systems switch is not pressed OFF

    Is the inspection result normal?

    YES 

    Warning systems switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals