LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1B01: Cam Aiming INCMP >> ADAS Control Unit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK SELF-DIAGNOSIS RESULTS

    Check if "C1B01" is detected in "Self Diagnostic Result" of "LANE CAMERA".

    Is "C1B01" detected?

    YES 

    Refer to DTC LOGIC .

    NO 

    GO TO STEP 2  .

  2. CHECK DATA MONITOR

    1. Start the engine.
    2. Check that "OK" is indicated for the value of "AIMING RESULT" in "DATA MONITOR" of "LANE CAMERA".

    Is "OK" indicated?

    YES 

    Replace the ADAS control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace the lane camera unit. Refer to REMOVAL AND INSTALLATION .