LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1A24: NP Range >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DTC REPRODUCE (1)

    1. Start the engine.
    2. Turn the LDP system ON.
    3. Wait for approximately 5 minutes or more after shifting the selector lever to "P" position.
    4. Perform "All DTC Reading" with CONSULT.
    5. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A24" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    GO TO STEP 2. 

  2. Check DTC reproduce (2)

    1. Wait for approximately 5 minutes or more after shifting the selector lever to "N" position.
    2. Perform "All DTC Reading".
    3. Check if the "C1A24" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A24" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals