LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1A15: Gear Position >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start the engine.
    2. Turn the LDP system ON.
    3. Drive the vehicle at 10 km/h (6 MPH) or faster for approximately 15 minutes or more.
      CAUTION:

      Always drive safely.

    4. Stop the vehicle.
    5. Perform "All DTC Reading" with CONSULT.
    6. Check if "C1A15" is detected as the current malfunction in the "Self Diagnostic Result" of "ICC/ADAS".

    Is "C1A15" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals