LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1A06: Operation SW >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK ICC STEERING SWITCH

    Check resistance between ICC steering switch terminals.

    Terminal Switch operation Resistance [Ω]
    13 16 When pressing MAIN switch Approx. 1
    When pressing dynamic driver assistance switch Approx. 267
    When pressing CANCEL switch Approx. 615
    When pressing DISTANCE switch Approx. 1090
    When pressing SET/COAST switch Approx. 1805
    When pressing RESUME/ACCELERATE switch Approx. 2985
    When all switches are not pressed Approx. 5415

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace the ICC steering switch. Refer to REMOVAL AND INSTALLATION .