LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System (DTC/Circuit Diagnosis) (LDW & LDP) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1A05: Brake SW/Stop Lamp SW >> Component Inspection (Stop Lamp Switch)

Component Inspection (Stop Lamp Switch)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK STOP LAMP SWITCH

    Check for continuity between stop lamp switch terminals.

    Terminal Condition Continuity
    1 2 When brake pedal is depressed Yes
    When brake pedal is released No
    3 4 When brake pedal is depressed Yes
    When brake pedal is released No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace stop lamp switch.

scientia non olet · About LEMON Manuals