RH Seat: Seatback: Assembly

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is in the reverse order of disassembly.

Install new hog rings on the seatback trim in original positions.

Courtesy of NISSAN NORTH AMERICA, INC.
Use only one hog ring in each designated location.
Make sure hog rings are correctly fastened around both the seatback trim and seatback pad wires.
Use INFINITI standard hog rings and tools to assemble.
Make sure hook fastener is pressed into place after seatback trim is assembled.
Smooth out all wrinkles during assembled.