Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR

Turn ignition switch OFF.
Disconnect seatback thermal electric device connector.

Check resistance between seatback thermal electric device terminals.

Seatback thermal electric device		Resistance (Approx.)
Terminal		Resistance (Approx.)
3	4	1000Ω^*

^* : When sensor temperature is 25°C (77°F).

Is the inspection result normal?

YES

Inspection End.

Replace seatback thermal electric device. Refer to SEATBACK THERMAL ELECTRIC DEVICE .