LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Seats (Except Hybrid)) >> DTC/Circuit Diagnosis >> Seat Cushion Thermal Electric Device Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK SEAT CUSHION THERMAL ELECTRIC DEVICE SENSOR

    1. Turn ignition switch OFF.
    2. Disconnect seat cushion thermal electric device connector.
    3. Check resistance between seat cushion thermal electric device terminals.
      Seat cushion thermal electric device Resistance
      (Approx.)
      Terminal
      3 4 1000Ω*

      * : When sensor temperature is 25°C (77°F).

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace seat cushion thermal electric device. Refer to SEAT CUSHION THERMAL ELECTRIC DEVICE .

scientia non olet · About LEMON Manuals