DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SELF-DIAG RESULT
CONSULT
- Turn ignition switch ON.
- Perform "Self Diagnostic Result" mode of "AIR BAG".
CONSULT
- Turn ignition switch ON.
- Check the air bag warning lamp status. Refer to SRS OPERATION CHECK .
NOTE:SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES
Refer to DIAGNOSIS PROCEDURE .
NO-1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2
Confirmation after repair: Inspection End.