LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (SRS Airbag Control System (Except Hybrid)) >> System Description >> Diagnosis System (Air Bag) >> SRS Final Check >> Diagnosis Mode

Diagnosis Mode

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect CONSULT.
  2. Confirm that zero point reset of OCS is complete.
  3. If no DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", repair of SRS is completed. Go to step 4.

    If any DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", the malfunction has not been repaired completely or another malfunction is being detected. Perform SRS Operation Check again. Refer to SRS OPERATION CHECK .

  4. Touch "ERASE".
    NOTE:

    Touching "ERASE" will clear the SRS memory of the malfunction ("SELF-DIAG [PAST]"). If "SELF-DIAG [PAST]" is not erased, User Mode may show the previous system malfunction even if the malfunction has been repaired completely. 

  5. Check that no malfunction is detected in "SELF-DIAG [PAST]".
  6. Exit Diagnosis Mode and disconnect the CONSULT.
  7. Perform SRS Operation Check. Refer to SRS OPERATION CHECK .
scientia non olet · About LEMON Manuals