LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Washer Fluid Level Switch Circuit >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK WASHER FLUID LEVEL SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect washer fluid level switch connector.
    3. Check washer fluid level switch.
      Washer fluid level switch Condition Continuity
      Terminals
      1 2 Washer fluid level switch ON Yes
      Washer fluid level switch OFF No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace washer fluid level switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals