Component Inspection
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK METER CONTROL SWITCH
- Turn ignition switch OFF.
- Disconnect meter control switch connector.
- Check meter control switch.
Meter control switch Condition Continuity Terminals 1 2 When illumination control switch (-) is pressed Yes Other than the above No 3 When trip reset switch is pressed Yes Other than the above No 12 When illumination control switch (+) is pressed Yes Other than the above No
Is the inspection result normal?
YES
Inspection End.
NO
Replace meter control switch. Refer to REMOVAL AND INSTALLATION .