Removal And Installation: Removal
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.
NOTE:
When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
CAUTION:
Perform this step engine is cold.
- Drain engine coolant from radiator. Refer to CHANGING ENGINE COOLANT .
- Remove front air duct. Refer to EXPLODED VIEW .
- Remove hose clamps, and remove CVT water hose A.
- Remove hose clamps, and remove CVT water hose B.
- Remove hose clamps, and remove CVT water hose C.