LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake Control System (Without ICC) (Except Hybrid)) >> Unit Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the side stay cover (LH/RH) from the center console assembly. Refer to EXPLODED VIEW .
  2. Disconnect the harness connector from the yaw rate/side/decel G sensor.
  3. Remove the yaw rate/side/decel G sensor nuts.
  4. Remove yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals