LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake Control System (Without ICC) (Except Hybrid)) >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> Consult Function >> Self Diagnostic Result >> Freeze Frame Data (FFD)

Freeze Frame Data (FFD)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.

Item name Display item
IGN counter
(0 - 39)
The number of times that ignition switch is turned ON after the DTC is detected is displayed.
  • When "0" is displayed: It indicates that the system is presently malfunctioning.
  • When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.
    NOTE:

    Each time when ignition switch is turned OFF to ON, numerical number increases in 1 → 2 → 3...38 → 39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis is erased.