Component Description

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

No.	Component		Function
1.	ECM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Accelerator pedal position signal Engine speed signal Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication. Target throttle position signal
2.	TCM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Shift position signal Current gear position signal
3.	Steering angle sensor		STEERING ANGLE SENSOR
4.	Combination meter		COMPONENT PARTS LOCATION
5.	ABS actuator and electric unit (control unit)	Pump/motor	ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
		Motor relay
		Actuator relay (main relay)
		ABS IN valve
		ABS OUT valve
		Cut valve 1
		Cut valve 2
		Pressure sensor
6.	Brake fluid level switch		BRAKE FLUID LEVEL SWITCH
7.	Vacuum sensor		VACUUM SENSOR
8.	IPDM E/R		Supplies power to the following components: ABS actuator and electric unit (control unit) Steering angle sensor Yaw rate/side/decel G sensor
9.	Wheel sensor		WHEEL SENSOR AND SENSOR ROTOR
10.	Stop lamp switch		STOP LAMP SWITCH
11.	Parking brake switch		PARKING BRAKE SWITCH
12.	VDC OFF switch		VDC OFF SWITCH
13.	Wheel sensor		WHEEL SENSOR AND SENSOR ROTOR
14.	ADAS control unit		ADAS CONTROL UNIT