LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake Control System (Without ICC) (Except Hybrid)) >> Symptom Diagnosis >> Abs Function Does Not Operate >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • VDC function, TCS function, ABS function, EBD function, hill start assist function and Brake force distribution function never operate when the vehicle speed is 10 km/h (6.2 MPH) or less. However, hill start assist function operates when the vehicle speed is 0 km/h (0 MPH) (the vehicle is in stop status).
  • VDC function and TCS function never operate when VDC OFF switch is operated (when VDC OFF indicator lamp turns ON).

  1. CHECK ABS WARNING LAMP

    Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn ON and turn OFF approx. 1 second after key switch is turned ON. Check that ABS warning lamp, brake warning lamp and VDC warning lamp and stay in OFF status during driving.

    CAUTION:

    Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake fluid is less than the specified level (brake fluid level switch is ON).

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Perform self-diagnosis result. Refer to CONSULT FUNCTION .

scientia non olet · About LEMON Manuals