LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake Control System (Without ICC) (Except Hybrid)) >> Basic Inspection >> Additional Service When Replacing Abs Actuator And Electric Unit (Control Unit) >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM THE NEUTRAL POSITION ADJUSTMENT FOR THE STEERING ANGLE SENSOR

    Perform the neutral position adjustment for the steering angle sensor.

    Refer to WORK PROCEDURE , GO TO STEP 2  .

  2. PERFORM CALIBRATION OF THE DECEL G SENSOR

    Perform calibration of the decel G sensor.

    Refer to WORK PROCEDURE .

scientia non olet · About LEMON Manuals