LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (General Information (Except Hybrid)) >> Precaution >> Lifting Point >> Special Service Tool

Special Service Tool

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number
(Kent-Moore No.)
Tool name		 Description
LM4086-0200
(-)
Board on attachment
GNSS-NT001-001Courtesy of NISSAN NORTH AMERICA, INC.
LM4519-0000
(-)
Safety stand attachment
GNSS-NT002-002Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:
  • Every time the vehicle is lifted up, maintain the complete vehicle curb condition.
  • Since the vehicle's center of gravity changes when removing main parts on the front side (engine, transmission, suspension etc.), support a jack up point on the rear side garage jack with a transmission jack or equivalent.
  • Since the vehicle's center of gravity changes when removing main parts on the rear side (rear axle, suspension, etc.), support a jack up point on the front side garage jack with a transmission jack or equivalent.
  • Be careful not to smash or do anything that would affect piping parts.
scientia non olet · About LEMON Manuals