LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Control System (IPDM E/R) (Except Hybrid)) >> Ecu Diagnosis Information >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> FAILSAFE >> Can Communication Control >> If No Can Communication Is Available With BCM

If No Can Communication Is Available With BCM

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Control part Fail-safe in operation
Headlamp
  • Turns ON the headlamp low relay when the ignition switch is turned ON
  • Turns OFF the headlamp low relay when the ignition switch is turned OFF
  • Headlamp high relay OFF
  • Parking lamps
  • Side marker lamps
  • License plate lamps
  • Tail lamps
  • Turns ON the tail lamp relay when the ignition switch is turned ON
  • Turns OFF the tail lamp relay when the ignition switch is turned OFF
Front wiper
  • The status just before activation of fail-safe control is maintained until the ignition switch is turned OFF while the front wiper is operating at LO or HI speed.
  • The wiper is operated at LO speed until the ignition switch is turned OFF if the fail-safe control is activated while the front wiper is set in the INT mode and the front wiper motor is operating.
Horn Horn OFF
Ignition relay The status just before activation of fail-safe is maintained.
scientia non olet · About LEMON Manuals