LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Control System (IPDM E/R) (Except Hybrid)) >> Ecu Diagnosis Information >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> DTC Index

DTC Index

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT display Fail-safe TIMENOTE Refer to
No DTC is detected. Further testing may be required. - - - -
U1000: CAN COMM CIRCUIT * CRNT 1 - 39 DESCRIPTION
U1010: CONTROL UNIT (CAN) * CRNT 1 - 39 DTC LOGIC
B2098: IGN RELAY ON * CRNT 1 - 39 DTC LOGIC
B2099: IGN RELAY OFF - CRNT 1 - 39 DTC LOGIC
B210B: INHIBIT relay ON stuck failure - CRNT 1 - 39 DTC LOGIC
B210C: INHIBIT relay OFF stuck failure - CRNT 1 - 39 DTC LOGIC
B210D: STARTER relay ON stuck failure - CRNT 1 - 39 DTC LOGIC
B210E: STARTER relay OFF stuck failure - CRNT 1 - 39 DTC LOGIC
B210F: Interlock/NP switch ON stuck failure - CRNT 1 - 39 DESCRIPTION
B2110: Interlock/NP switch OFF stuck failure - CRNT 1 - 39 DESCRIPTION
NOTE:

The details of TIME display are as follows.

  • CRNT: The malfunctions that are detected now
  • 1 - 39: The number is indicated when it is normal at present and a malfunction was detected in the past. It increases like 0 → 1 → 2 ••• 38 → 39 after returning to the normal condition whenever IGN OFF → ON. It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process.