LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Control System (DTC/Circuit Diagnosis) (VQ35DE) (Except Hybrid) (1 Of 3)) >> DTC/Circuit Diagnosis >> DTC P0037, P0038, P0057, P0058: Ho2S2 Heater >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DTC No. CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition Possible cause
P0037 HO2S2 HTR (B1)
(HO2S heater control circuit low bank 1 sensor 2)
The current amperage in the heated oxygen sensor 2 heater circuit is out of the normal range.
(An excessively low voltage signal is sent to ECM through the heated oxygen sensor 2 heater.)
  • Harness or connectors

    (The heated oxygen sensor 2 heater circuit is open or shorted.)

  • Heated oxygen sensor 2 heater
P0038 HO2S2 HTR (B1)
(HO2S heater control circuit high bank 1 sensor 2)
The current amperage in the heated oxygen sensor 2 heater circuit is out of the normal range.
(An excessively high voltage signal is sent to ECM through the heated oxygen sensor 2 heater.)
  • Harness or connectors

    (The heated oxygen sensor 2 heater circuit is shorted.)

  • Heated oxygen sensor 2 heater
P0057 HO2S2 HTR (B2)
(HO2S heater control circuit low bank 2 sensor 2)
The current amperage in the heated oxygen sensor 2 heater circuit is out of the normal range.
(An excessively low voltage signal is sent to ECM through the heated oxygen sensor 2 heater.)
  • Harness or connectors

    (The heated oxygen sensor 2 heater circuit is open or shorted.)

  • Heated oxygen sensor 2 heater
P0058 HO2S2 HTR (B2)
(HO2S heater control circuit high bank 2 sensor 2)
The current amperage in the heated oxygen sensor 2 heater circuit is out of the normal range.
(An excessively high voltage signal is sent to ECM through the heated oxygen sensor 2 heater.)
  • Harness or connectors

    (The heated oxygen sensor 2 heater circuit is shorted.)

  • Heated oxygen sensor 2 heater