LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Warning Chime System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Seat Belt Buckle Switch Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK COMBINATION METER INPUT SIGNAL

    1. Start engine.
    2. Monitor seat belt warning lamp while fastening and unfastening the driver seat belt buckle.
      Seat belt warning lamp  
      When driver seat belt is fastened : OFF
      When driver seat belt is unfastened : ON

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals