LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Engine Control System (Wiring Diagrams And Basic Inspection) (VQ35DE) (Except Hybrid)) >> Basic Inspection >> Fuel Pressure >> Work Procedure >> Fuel Pressure Release >> Without Consult

Without Consult

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel pump fuse located in IPDM E/R.
  2. Start engine.
  3. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
scientia non olet · About LEMON Manuals