LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Security Control System (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Horn Function >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK ANTI-THEFT HORN RELAY

    1. Turn ignition switch OFF.
    2. Disconnect anti-theft horn relay.
    3. Check voltage between anti theft horn relay terminal and ground under the following conditions.
    (+) (-) Condition Voltage (V)
    (Approx.)
    anti-theft horn relay
    Terminal
    3 Ground 12 V direct current supply between terminals 1 and 2 12
    No current supply 0

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace anti-theft horn relay.

scientia non olet · About LEMON Manuals