DTC Detection Logic
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2617 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC
.
- If DTC B2617 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC
.
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2617 |
STARTER RELAY CIRCUIT |
- An immediate operation of starter relay is requested by BCM, but there is no response for more than 1 second
- BCM is not commanding starter relay activation, but BCM detects starter relay output is active
|
|