LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Security Control System (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC B2602: Shift Position >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH)

    1. Turn ignition switch OFF.
    2. Disconnect CVT shift selector connector.
    3. Check continuity between CVT shift selector (park position switch) terminals.
      CVT shift selector (park position switch) Condition Continuity
      Terminal
      5 6 Selector lever P (Park) position No
      Other than above Yes

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace CVT shift selector. Refer to REMOVAL AND INSTALLATION (RE0F10E) or REMOVAL AND INSTALLATION (RE0F10J).

scientia non olet · About LEMON Manuals