LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Security Control System (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Ignition switch ON under the following conditions and wait for at least 1 second:
      • CVT selector lever is in the P (Park) or N (Neutral) position.
      • Do not depress the brake pedal.
    2. Check "Self Diagnostic Result" using CONSULT.

    Is DTC detected?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals