LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Intelligent Cruise Control System (Introduction, Wiring Diagrams And Basic Inspection) (ICC) (Except Hybrid)) >> System Description >> Operation >> Conventional (Fixed Speed) Cruise Control Mode Function >> Menu Displayed By Pressing Each Switch >> Warning And Automatic Cancellation Display

Warning And Automatic Cancellation Display

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Condition Description Display on ICC system display
Warning display When the ICC system is malfunctioning A chime sounds and the control is automatically canceled.
NOTE:

Turn the engine OFF and restart engine. If there is no malfunction, it is possible to set the system

GNSALOIA0053ZZ-053Courtesy of NISSAN NORTH AMERICA, INC.
System cancel display
  • When brake pedal is depressed
  • When pressing CANCEL switch
  • When the vehicle slows down more than (13 km/h) 8 MPH below the set speed
  • When the selector lever is not in the "D" position or manual mode
  • When the parking brakes are applied
  • When VDC (including the TCS) operates
  • When a wheel slips
A chime sounds and the control is automatically canceled
NOTE:
  • The system will be in a standby, after the control is automatically canceled
  • A chime sounds when the control is automatically canceled, except when brake pedal is depressed or when CANCEL switch is pressed
GNSALOIA0053ZZ-053Courtesy of NISSAN NORTH AMERICA, INC.
NOTE:

When the ICC system is automatically canceled, the cancellation condition can be displayed on "Work support" of CONSULT (ICC/ADAS).