LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Intelligent Cruise Control System (Introduction, Wiring Diagrams And Basic Inspection) (ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> C1A01 Power Supply Circuit 1, C1A02 Power Supply Circuit 2 >> ICC Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start the engine.
    2. Turn the MAIN switch of ICC system ON.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "C1A01" or "C1A02" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/RADAR".

    Is "C1A01" or "C1A02" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals