Physical Values
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal (Wire color) |
Description | Condition | Reference value (Approx.) |
|||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | Ignition switch | Operation | |
| 1 (B) |
Ground | Ground | - | ON | - | 0V |
| 2 (L) |
Ground | Inverter VCC | Input | ACC | - | 9V |
| 3 (V) |
Ground | Signal VCC | Input | ACC | - | 9V |
| 4 (W) |
Ground | Composite image ground | - | ON | - | 0V |
| 5 (Shield) |
- | Composite image signal shield | - | - | - | - |
| 6 (B) |
Ground | RGB signal (G: green) | Input | ON | Begin Confirmation/Adjustment mode, then select "Color Spectrum Bar" | |
| 7 (Shield) |
- | RGB signal shield | - | - | - | - |
| 8 (G) |
Ground | Horizontal synchronizing (HP) signal | Output | ON | - | |
| 9 (W) |
Ground | RGB area (YS) signal | Input | ON | RGB image displayed | 5V |
| DVD image displayed | ||||||
| 11 (W) |
Ground | Communication signal (CONT→DISP) |
Input | ON | Adjusting display brightness | |
| 13 (LG) |
Ground | Inverter ground | - | ON | - | 0V |
| 14 (B) |
Ground | Signal ground | - | ON | - | 0V |
| 15 (B) |
Ground | Composite image signal | Input | ON | Camera image displayed | |
| 17 (R) |
Ground | RGB signal (R: red) | Input | ON | Begin Confirmation/Adjustment mode, then select "Color Spectrum Bar" | |
| 18 (W) |
Ground | RGB signal (B: blue) | Input | ON | Begin Confirmation/Adjustment mode, then select "Color Spectrum Bar" | |
| 19 (B) |
Ground | RGB synchronizing signal | Input | ON | - | |
| 20 (R) |
Ground | Vertical synchronizing (VP) signal | Output | On | - | |
| 21 (Shield) |
- | Synchronizing signal shield | - | - | - | - |
| 22 (B) |
Ground | Communication signal (DISP→CONT) |
Output | ON | Adjusting display brightness | |
| 23 (Shield) |
- | Communication signal shield | - | - | - | - |