LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Drive Mode Selector (Except Hybrid)) >> DTC/Circuit Diagnosis >> Drive Mode Select Switch Circuit >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. Drive mode select switch inspection

    1. Turn ignition switch OFF.
    2. Disconnect drive mode select switch connector.
    3. Check continuity between drive mode select switch connector terminal 6 and drive mode select switch connector terminals 1, 2, 3 and 4.
      Drive mode select switch Switch position Continuity
      Terminals
      6 1 SNOW Existed
      2 ECO
      3 STANDARD
      4 SPORT

    Is the inspection result normal?

    YES 

    Inspection

    NO 

    Replace drive mode select switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals