Removal Of Liquid Gasket
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not damage the mating surfaces.
- After removing the bolts and nuts, separate the mating surface and remove the old liquid gasket using Tool.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
| Tool number |
: KV10111100 (J-37228) |
- Tap the pan seal cutter to insert it (1).
- In areas where the Tool is difficult to use, lightly tap to slide it (2).