Removal Of Liquid Gasket

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Be careful not to damage the mating surfaces.

After removing nuts and bolts, separate the mating surface using Tool and remove old liquid gasket.

Tool number : KV10111100 (J-37228)

Courtesy of NISSAN NORTH AMERICA, INC.
Tap (1) Tool to insert it, and then slide it (2) by tapping on the side as shown above.
In areas where Tool is difficult to use, use plastic hammer to lightly tap the parts, to remove it.