LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Lubrication System (Except Hybrid)) >> Periodic Maintenance >> Engine Oil >> Changing Engine Oil

Changing Engine Oil

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Be careful not to burn yourself, as the engine oil may be hot.
  • Prolonged and repeated contact with used engine oil may cause skin cancer; try to avoid direct skin contact with used engine oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
  1. Position the vehicle so it is level on the hoist.
  2. Warm up the engine and check for engine oil leaks.
  3. Stop engine and wait for 10 minutes.
  4. Remove the oil pan drain plug and oil filler cap.
  5. Drain the engine oil.
  6. Install the oil pan drain plug with a new washer and refill the engine with new engine oil.
    Oil specification and viscosity : Refer to ENGINE OIL RECOMMENDATION (United States and Canada) .
    Oil pan drain plug : 34.3 N•m (3.5 kg-m, 25 ft-lb)
    CAUTION:
    • Be sure to clean the oil pan drain plug and install with a new washer.
    • The refill capacity depends on the engine oil temperature and drain time. Use the specifications for reference only. Always use the dipstick to determine when the proper amount of engine oil is in the engine.
  7. Warm up the engine and check around the oil pan drain plug and oil filter for oil leaks.
  8. Stop engine and wait for 10 minutes.
  9. Check the engine oil level using the dipstick.
    CAUTION:

    Do not overfill the engine with engine oil.

scientia non olet · About LEMON Manuals