LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Starting System (Except Hybrid)) >> Removal And Installation >> Starter Motor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine room cover. Refer to REMOVAL AND INSTALLATION .
  2. Remove the battery tray and battery tray support. Refer to REMOVAL AND INSTALLATION .
  3. Remove CVT water hose. Refer to EXPLODED VIEW .
  4. Disconnect the "S" connector, and the "B" terminal harness.
  5. Remove the starter motor bolts, then remove the starter motor.
scientia non olet · About LEMON Manuals