Dowel Pin Alignment: Installation
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- When installing the drive plate to the crankshaft, use the match mark (A) as shown in illustration to correctly align the crankshaft side dowel pin to the drive plate side dowel pin hole.
- Install the drive plate and the reinforcement plate in the direction as shown in illustration.
- Tighten the drive plate bolts in a diagonal pattern in two steps. Refer to DISASSEMBLY AND ASSEMBLY .
- Use a suitable tool to lock the drive plate.