LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical (Except Hybrid)) >> Removal And Installation >> Valve Timing Control >> Valve Timing Control Solenoid Valves (Bank 2) >> Removal

Valve Timing Control Solenoid Valves (Bank 2): Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove power steering oil pump. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect the harness connector from intake valve timing intermediate lock control solenoid valve (bank 2). (For United States and Canada)
  3. Disconnect the harness connector from exhaust valve timing control solenoid valve (bank 2). (For United States and Canada)
  4. Disconnect the harness connector from intake valve timing control solenoid valve (bank 2).
  5. Remove intake valve timing intermediate lock control solenoid valve (bank 2) and exhaust valve timing control solenoid valve (bank 2) from valve timing control cover (bank 2). (For United States and Canada)
    CAUTION:

    Do not reuse O-rings.

  6. Remove intake valve timing control solenoid valve (bank 2) from valve timing control cover (bank 2).
    CAUTION:

    Do not reuse O-rings.

scientia non olet · About LEMON Manuals