Removal And Installation Of Rear Oil Seal: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Remove the upper oil pan. Refer to REMOVAL AND INSTALLATION (UPPER OIL PAN) .
Remove drive plate. Refer to DOWEL PIN ALIGNMENT .
Remove rear oil seal retainer using Tool.

Courtesy of NISSAN NORTH AMERICA, INC.

Tool Number : KV10111100 (J-37228)
CAUTION:
- Be careful not to damage mating surface.
- If rear oil retainer is removed, replace it with a new one
NOTE:
Rear oil seal and retainer form a single part and are replaced as an assembly.