LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical (Except Hybrid)) >> Removal And Installation >> Ignition Coil >> Removal And Installation RH >> Removal

Removal And Installation RH: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold collector. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect the harness connector from ignition coil.
  3. Remove the ignition coil.
    CAUTION:

    Do not shock ignition coil.

scientia non olet · About LEMON Manuals